Type: DVB-T2 Antenna
Working frequency: VHF(172-240Mhz)/ UHF(470-860Mhz)
LNA high gain: 5dBi
Signal range: 35 miles
Receiving signal: ATSC, DVB-T, DVB-T2, ISDB
Compatibility: 720P, 1080i, 1080P/ ATSC,4K
Cable length: approx. 3 meters/ 10ft
Connector: F male
Working temperature: -45-85℃
Storage temperature: -45-85℃
Net Weight: 3oz(85g)
How to Use:
Step 1: connect the end(f-male) of an attached coaxial cable to the ANT/IN connector on the back of the TV or DVB-T tuner.
Step 2: In the TV’s setup menu, set the tuner mode to “Antenna” or “Air”. for more detailed instructions, please refer to your TV manual.
Step 3: In the Tv’s setup menu, Choose ANT(Air Antenna) and set TV to “scan” for channels. this can sometimes be listed as auto-program, auto-scan, channel search or channel scan. consult the TV manual for detailed instructions.
Step 4: if the reception is sporadic, try moving the antenna to another location and re-scanning the TV until the optimal position is found.
Step 5: fix the antenna at the optimal position you found.
Placing the antenna higher or close to/in a window may result in better reception. you must re-scan whenever you move the antenna.
If you use a flat HDTV, please go through your TV manual to make sure your TV comes with a built-in tuner for Free-view.
You need to re-tune your Free-view TVs and digital receiver from time to ensure you are reserving all available services. re-tuning takes only a few minutes and can be done with your remote control.
TV reception capacity depends on the distance among your home, transmitting tower and surrounding
1x HDTV Indoor Antenna
Note: Very portable and convenient if you travel and comping, watch Clear HDTV Channel for free no matter where you go.